Home Riistvara Lakkimine ja lakkimine MGI JETvarnish 3D
MGI JETvarnish 3D varnishing and foiling professional printer

MGI JETvarnish 3D

  • Muudab tavalised trükitööd tähelepanuväärseteks ja atraktiivseteks trükirakendusteks
  • Loob teie trükitud tööga sensoorsed elamused
  • Aitab teil lisada väärtust olemasolevatele trükitöödele ja eristada ennast
  • Tekitab säravaid fooliumiefekte digitaalsetel ja off set töödel
  • Pakub revolutsioonilise AIS SmartScanneri abil täiuslikku registreerimist
Saatke taotlus
MGI JETvarnish 3D varnishing and foiling professional printer

Omadused

Omadused

Peamised omadused

Lisage oma trükitöödele lisaväärtust ja eristage end. "Me-too-toodete" trükkimisega ei saa enam palju raha teenida; ainus viis väärtusliku kasumi saamiseks on viia oma loovus uuele tasemele. Siinkohal tulevadki appi lakkimine ja fooliumkatted - murrangulised tehnoloogiad, mis võimaldavad teil suurendada oma kasumit ilma mugavustsoonist väljumata. MGI digitaalne lakkimis- ja kuumfooliumistehnoloogia muudab trükitööd suurejoonelisteks ja vastupandamatuteks trükitoodeteks, mis äratavad kohe teie klientide ja nende klientide tähelepanu. Digilakkimise tehnoloogia abil on teil lihtne värvida digitrükke, rõhutada kindlaksmääratud piirkondi või lisada 3D-efekte - kõik see aitab teil pakkuda atraktiivseid ja elavaid trükitöid, mis pakuvad puutetundlikku elamust. Veelgi enam, kombinatsioon inline kuumfooliumimooduliga iFOIL annab teile laia värvivaliku ja säravad efektid.

MGI JETvarnish 3D varnishing and foiling professional printer

Tehnilised andmed ja allalaadimised

Tehnilised andmed ja allalaadimised
PRODUCT SPECIFICATIONS – JETVARNISH 3D
UV Inkjet Technology MGI’s exclusive inkjet engine technology
Drop-on-Demand (Dod) inkjet application
Piezoelectric print heads in single pass printing
Flexible & scalable architecture
Variable Coating Thicknesses Depending on your file and the substrate used, the coating thickness
can vary from a traditional flat spot UV coating of 3 microns (μm) up to 200 μm for 3D raised texture eff ects and a tactile finish
Production speed Up to 3,123(1) B2 sheets size per hour for all versions
Registration Left & right motorized registration side guides. Automatic registration
using the built-in AIS SmartSanner technology for real-time management of entire sheet. No registration marks required
Overall registration of ± 200 microns
Formats Min: 21 x 29.7 cm / 8.37 x 11.7’’ (width x length)
Max: 52 x 105 cm / 20 x 42’’ (standard)
64 x 120 cm / 25 x 47’’ (extended) (2)
Printable areas 51 cm / 19’’ (standard)
56 cm / 22’’ (extended)(2)
Substrate thickness Motorized inkjet head height-adjustment
Min: 135 gsm and not less than 150 μm / 6 mil before
printing & lamination
Max: Up to 600 gsm
Substrates Compatibility Enhancement on most(3) matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other coated
materials. Spot 3D coat directly onto most(3) digital prints (ie. MGI Meteor)
UV Coatings and Yields Several coating formulas available, one dedicated to 2D (flat coat) and
the other for 2D/3D usage. The JETvarnish 3D comes standard with
2 coating tanks and 2 coating circuits allowing a quick changeover
between coatings. Tanks have a high capacity volume (18 liters).
“On-the-fly” tank refilling possible during production without any
interruption and no waste.
Paper Path 100% flat paper path
Vacuum feed system
Air feed system
Automatic double sheet detection
In-line UV Dryer “On-the-fly” drying & curing via integrated UV lamps
Front End System Intuitive touchscreen software management suite controlled
by a 27’’ monitor.
Includes functions for operators: Job cost calculator, image editor, queue manager and reprint, printheads settings. Dedicated controller for equipment settings and technical data. Ethernet connection 10/100/1000 BT in RJ 45


(1) speed will vary according to printing parameter used.
(2) with the pallet feeder and stacker option.
(3) with the 75cm/29’’ Evo kit.
(4) Confirm the substrate/lamination/toner/metallic film compatibility with your Konica Minolta Representative
(5) Standard configuration
(6) require paper above 250 Gsm/250 μm.
(7) depending on the configuration selected.

  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Nüüd saate tasuta konsultatsiooni