Professional Printing, product studio picture

MGI JETvarnish 3D Web 400

Rullilt rullile digitaalne 2D ja 3D lakkimine ja fooliumiga stantsimine. Kiirus - kuni 42 m/min

Rullilt rullile 2D ja 3D kohtlakkimine ning kuum fooliumiga stantsimine etikettide ja paindlike pakendite viimistlemiseks
Kiirus kuni 42 m/min v]imalusegab saavutada lakikiht paksusega 7 kuni 232 mikronit reljeefsete efektide jaoks
Isikupärastamine, muutuvate andmete töötlemise võimalused
Täpne registreerimine alates esimesest etiketist. Nutikas skänner, mis skaneerib iga etiketi ja teostab täpse laki positsioneerimise
Ühildub läikivate, mattide, holograafiliste ja värviliste fooliumitega laiusega 100 kuni 420 mm
Võib kasutada kaetud, katmata kleepuva paberi, tekstuurpaberi, sünteetiliste kiledega
Viimistlust saab teha UV-, ofset-, flekso- ja digitaalsetele trükitöödele

Võtke ühendust

Jaga:

Omadused

MGI JetVarnish 3D Web 400

100% digitaalne viimistluslahendus – punkt-UV-lakkimine, kuum fooliumiga stantsimine ja muutuvate andmete ühe trükkimisprotsessi jooksul.

Uskumatu efektid

UV-lakkimine ja kuum fooliumiga stantsimine sobib kaetud ja katmata materjalidele, sünteetikale, paberile ja kergpapile

Stantsimisseade

Valikuline poolpöörlev stantsimisseade etikettide viimistlemiseks ühes liinis, standardsete kahe lõikenoaga ja lünkade kontrollsüsteemiga

Lihtne kasutamine

Seade on kiiresti arusaadav ja lihtsast kasutatav, nõudes vähem erioskusi, jättes operaatorile rohkem aega muude ülesannete jaoks

Täispöörd-flexo UV-jaam

Reas töötav pöörd-flexo UV-jaam täispikkuses lakkimiseks ja kruntimiseks, mis on võimeline UV-lakkimiseks ja kuumfooliumiga stantsimiseks paljudel erinevatel materjalidel, sealhulgas katmata materjalidel

iFoil tehnoloogia

Digitaalsed / muutuvad 2D ja 3D lamineerimisfooliumfoolimistööd, mis lisavad väärtust liimimise etikettide ja paindlike pakendite jaoks, valik metallist, holograafiline ja värviline foolium. Digitaalne/muutuv 2D- ja 3D lakkimine ja fooliumiga viimistlemine, lisandväärtus etikettidele ja painduvale pakendile, valikutega metallilisele, holograafilisele ja värvilisele fooliumile

MGI tehisintellekti SmartScanner® (AIS)

Laki ja kuuma fooliumi registreerimissüsteem, mis skaneerib iga lehe ja võrdleb seda digitaalse malliga; puuduvad registreerimismärgid, lühem seadistamisaeg ja vähem jäätmeid

Lahti- ja tagasikerimisseade

Muutuv rulli laius, automaatne rulli läbimõõdu arvutamine, pinge reguleerimise ühenduslaud ja palju muud

Suur tootmiskiirus ja täiuslik lakkimise kvaliteet

Kiirus kuni 42 meetrit minutis, märgatavad ja reljeefsed efektid 7 kuni 232 mikronit

Lai ühilduvus

Ühildub digitaalsete, fleksograafiliste ja ofset veebitehnoloogiatega


Printing Speeds	Up to 42m/mn¹ (depending on application).
Supported Web Widths	From 100 mm up to 420 mm
Finishing Width	The maximum image width is 405 mm
Substrate Types²	From 50 up to 400 microns (μm)Coated, uncoated and textured paper, film or labelSelf-adhesive labelsWhite or transparent synthetics, PP, PE, POPP, PETLight cardboard/folding cartonShrink film: PVC, PETG
Wide Compatibility	Compatible with the overall web-to-web printingTechnologies, narrow web digital presses and the traditional offset or flexo narrow web presses.
Unwinder	Maximum roll diameter capacity: 850 mmStandard inside core diameter: 3 inchesMaximum roll weight: ±120 kg
UV Flexo Station	An integrated flexo station for full size sleeve coating in rotary. This station is used to apply a UV protection varnish or primer prior to finishing. The module comes with an UV dryer. The station is equipped with an anilox cylinder.Additional anilox cylinders are available as upgrade options.
Spot UV Coating andEmbossing Station	This station uses MGI award-winning inkjet technology for producing Spot UV Coating. Any defined label area can receive Spot UV Coating with or without raised 3D texture effects. A simple grey level TIFF file designed by Prepress controls the surface area and the thickness of the varnish applied over the printed roll. This 100 % digital process eliminates traditional plates, screens and dies.
Varnish thickness	From 7² to 232² μm of varnish thickness (from 2D flat coats to 3D raised effects).
Inline curing	The unit is equipped with an UV dryer and a cooling drum for optimum web temperature control. The curing sequence also includes a special forward and backward roll motion to dry each label and eliminate waste between runs.
UV Varnish	Gloss varnish 99 GU
Hot Foiling Station	The hot foiling station adds luxurious effects and brand value to label and packaging products. Any defined label area can receive digitally-controlled foil with or without raised effects.A simple grey level TIF file designed by Prepress controls the surface area and the definition of the foil applied on the printed roll. This 100 % digital process eliminates traditional dies, plates and screens.Foil application can be bypassed when not necessary.
Foil rolls	Foils are delivered on rolls:Foil widths from 100 mm up to 420 mmFoil roll core diameter: 1’’ and 3’’Foil lengths from 400 m up to 2,000 mUp to 3 rolls can be used simultaneously during the production
Die Cutting Unit	A semi-rotary die cutting unit is available as an option to finish labels in-line on the JETvarnish 3DWeb. The unit uses a 21’’ magnetic cylinder and an automatic registering system. 2 slitter knives are included as well as a matrix rewinder.format in semi-rotary: 100 up to 480 mmmaximum matrix diameter: 600 mm2 slitter knives as standard: 10 maxGap master system for die height adjustment as an option.
Rewinder	Servo-motorized unit850 mm maximum roll diameter capacityStandard inside core diameter: 3 inchesMaximum roll weight: ± 120 kg
Printing PressCompatibility List	Digital: Konica Minolta AccurioLabel, HP Indigo WS4500, HPIndigo, WS6800, Epson, Xeikon, EFI, Durst, etc.Offset: All manufacturers and technologies: UV, H₂O orWATERLESSFlexo: All manufacturers and technologies: UV or Water based
Dimensions & Weight	400 V - 3Ph240 V - 1PhDry air compressor (oil-free): 8 bar/102 psi - 24 m³/h/6 cfmAll speeds are nominal
Corona substratetreatment module	In-line system made to optimise varnish adhesion on complex printed substrates
Variable Data Printing	To manage and edit files on the workstation,Full variable data (text, graphic, image) for both 2D/3D SpotCoating and Hot Foiling areas,Integrated barcode (1D/2D) reader system & controller,Raster Image Processor (RIP) as an option